Luxotic MF Box Mod (with screen) with Guillotine BF RDA - Wismec

Wismec

Add to Wishlist
Wismec introduces the Luxotic MF Box Mod and Guillotine BF RDA, a bottom feed combination that is capable of 100W maximum output, compatible by both 18650 and 21700 batteries and is powered by the Avatar Circuit Boards. The proprietary Avatar Circuit Board in this listing is a variable voltage board capable of variable wattage mode with a 100W maximum output, temperature control that is compatible with Nickel, Stainless Steel, and Titanium, and three user preference memory modes. The 0.91 in OLED screen displays wattage output, atomizer resistance, voltage output, amperage output and single battery life indicator.The Luxotic MF comes standard with an pre-installed threaded top squonk bottle with a 7ml E-Liquid capacity. The access door panel has smaller magnetic door panel that can be used to maintain the style of the device when a second battery is in place. The Luxotic MF can be powered by one 21700 with the squonk bottle installed or swap out the squonk bottle and install the dual 18650 battery adapter to allow you to use dual 18650 batteries in your Luxotic MF mod. (batteries sold separately). The versatility of squonking and dual battery makes the Luxotic MF Box an amazing all day device no matter which configuration the user chooses. Included with the Luxotic MF Box Starter Kit is the Guillotine RDA, a 24mm diameter rebuildable atomizer with a matching 25.5mm beauty ring that comes squonk ready. It features a two post build deck with single 6mm by 2mm guillotine-style terminals per post. Each post has two top mounted hex screws to fully secure the guillotine clamps. This starter kit comes with two 0.28 ohm pre-built Clapton coils. Airflow enters the Guillotine RDA via dual adjustable tapered 10mm by 2mm side air slots that taper into two 3mm by 2mm per side. The Guillotine RDA has a 9mm deep juice well and a 10mm tall, 10mm bore Wide 810 ULTEM drip tip and a 17mm tall, 9mm bore wide 810 ULTEM drip tip. The Wismec Luxotic MF Box Starter Kit is a versatile starter kit with numerous configurations for a variety of users.

Please Note: Each Luxotic MF comes with a single AVATAR Circuit Board only. The "WITH SCREEN" version includes the Variable Voltage chip.

Wismec Luxotic MF 100W Starter Kit Features:

Choose from Squonk or Normal Box Mode
Bottom Feeding Design
Juice Delivery System
7.0ml Capacity Squonk Bottle (Pre-installed)
Dimensions: 3-3/8" x 1-13/16" x 1"
Spring Loaded 510 Contact Pin
Output Wattage: 1.0 - 100.0W
Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
Temperature Control: 100 - 315C / 200 - 600F
Bypass Mode
0.91" OLED Display Screen
Optional Single 18650, Single 21700, or Dual 18650 Battery Modes Available
Requires (1) High Amp 18650 or 21700 Battery (Sold Separately)
Includes 18650 Battery Sleeve (Pre-installed)
Includes Dual 18650 Battery Connector
Requires External Battery Charger (Sold Separately)
Removable 510 Connector Panel
Short Circuit Protection
Temperature Protection
Over-charge Protection
Reverse Polarity protection

Wismec Guillotine V2 24mm RDA Features:

4mm Atomizer Diameter
25.5mm Beaty Ring
Two Post Build Deck
Single Guillotine-Style Terminals
6mm by 2mm Each Terminal
Double Top Mounted Hex Screws
Large Build Area for Specialty Coil
Two Included 0.28 ohm Clapton Coils
PEEK Insulator
9mm Deep Juice Well
Tapered Side Airflow System
10mm by 2mm Top Cap Air Slots
Two 3mm by 2mm Build Deck Air Slots Per Side
Tapered 510 ULTEM 5mm Bore Drip Tip
Optional 810 Top Cap
Bottom Feed 510 Pin Included

Includes:

1 Luxotic MF Box Mod
1 Guillotine RDA
1 Beauty Ring
1 Spare Parts Bag
1 Dual Battery Adapter
1 Gold Plated 510 Connector
1 Allen Keys
1 Hard Plastic Battery Sleeve
1 Soft Silicone Battery Sleeve
2 0.28 ohm Clapton Coils
1 Organic Cotton Patch
1 Spare ULTEM 810 Drip Tip
User Manuals and Warranty Card