The Easy Stealth mod is just 81mm in height, taking a single 18650 battery. The distance between the 510 base and the top of the mod is 29mm. Making RTA tanks with a maximum width of 24mm and height of around 30-40mm sit flush. The Easy Mod also benefits from wattage mode as well as temp mode with an easily visible led screen visible from the base. The chip-set is also a new design by Ambition Mods which we have found to be accurate, stable and reliable.
NOTE: The 510 on the mod does not have a spring loaded connector, when enough pressure is applied from an atomizer, it will push the circuit board out towards the fire switch causing an autofire. (Thankfully its not a hard short, and the chip has a 10 second auto cutoff).
To prevent autofire: either screw the atomizer just hand tight on to the mod or for a more stable connection, use a spacer (like a battery terminal insulator under the atomizer) to prevent excess pressure on the 510 pin. You will know if the 510 pin on your atomizer is too long if you install too firmly and the fire button doesn't click, or if the mod autofires.
- Size: 48mm 24mm 81mm
- Screen: 0.91 OLED Screen
- Input Voltage: 3.2v - 8v
- Input Current: 0.5A - 30A
- Output Power: 1W - 60W
- Output Voltage: 0.5V - 8V
- Atomizer Resistance: 0.1Ω - 3Ω
- Coil Material Supported: NI,SS,TI
- Temperature Limit: 200°F(100°C) - 600°F(315°C)
- Battery: 18650 (Battery not included)
- Easy Side Box Mod
- Instruction Manual