Copper X-Tension for XXX Mod - Vaperz Cloud

Vaperz Cloud

Please notify me when the item is back in stock.

Add to Wishlist

Introducing the X-Tension from Vaperz Cloud

The X-Tension is an add on middle section for the XXX and future modular tube mods from Vaperz Cloud. The X-Tension allows the use of 2 18650, or 2 20700 batteries to be used in compatible mods to run in 8.4V series configuration. 

The X-Tension is designed with a fixed contact plate in the middle so the batteries do not have to physically touch each other. This allows for use of various brands of batteries and a solid contact at all times.

The X-Tension also includes a sleeve for use of 18650 batteries and the sleeve can be removed when using 20700 batteries.

The X-Tension includes a thread on beauty ring for use in 20700 configurations to keep the sleek appearance of the setup regardless of different batteries being used.

WARNING: THIS IS AN ADVANCE USER DEVICE AND SHOULD ONLY BE USED BY EXTREMELY EXPERIENCED USERS ONLY. NEVER FIRE THE DEVICE WITHOUT AN ATOMIZER ATTACHED. THE BATTERIES MUST BE PLACED IN THE CORRECT ORIENTATION, OR IT WILL SHORT CIRCUIT AND EXPLODE. THIS IS A SERIES BATTERY DEVICE. IT IS HIGHLY RECOMMENDED THAT YOU NEVER BUILD YOUR RESISTANCE LOWER THAN 0.5 OHMS. FAILURE TO DO SO WILL RESULT IN SERIOUS INJURY. REMEMBER, THAT A DUAL SERIES BATTERY SETUP WILL DOUBLE THE VOLTAGE OUTPUT OF A SINGLE CELL OR PARALLEL SETUP. THUS, A DUAL SERIES DEVICE LIKE THIS WILL OUTPUT UP TO 8.5 VOLTS. REMEMBER THIS FOR YOUR POWER AND BATTERY SAFETY CALCULATIONS. REMEMBER, THAT A SERIES BATTERY SETUP WILL NOT INCREASE THE DISCHARGE CURRENT LOAD. REGARDLESS OF HOW MANY CELLS ARE IN A SERIES BATTERY SETUP, THE MAXIMUM DISCHARGE CURRENT IS THE SAME AS WITH ONE CELL, TWO CELL, OR THREE CELLS. REMEMBER THIS FOR YOUR POWER AND BATTERY SAFETY CALCULATIONS.