B2K RSA TRVPMATIK SS Media Blasted Deck - BB Vapes BRVND

BB Vapes Brvnd

Please notify me when the item is back in stock.

Add to Wishlist

B2K RSA TRVPMATIK SS Media Blasted Deck, compatible with the entire B2K RSA Series caps and accessories.

TRVP RULES EVERYTHING AROUND ME

New bottom feeder pin design, no need to remove the 510 pin to interchange from BF to non-BF mode. Easily remove or install bottom feeder plug (flathead screw) from the 510 pin directly and simple storage in the pocket integrated on the deck. The round head of the flathead plug creates a tight seal against the 510 pin cavity which makes it literally 100% leak free when in non-BF mode. Optional micro gaskets for the plug is included and can be used with or without.

The Deck:

  • Media blasted for a matte satin finish.
  • Positive PEEK insulator.
  • Base of deck with integrated o-ring to protect mod from scratches and prevents liquid from leaving in/out of 510 connector.
  • Milled juice reservoir to allow more juice to absorb into wick when squonking or dripping.
  • Integrated coil guide groove.
  • Dual 45 degree angled 2mm x 6mm adjustable airflow. Side/bottom air current design for maximum flavour and smooth draw.
  • Non reduced 316 stainless steel single coil postless build deck to maximize real estate.
  • 1mm airflow ring cuts airflow in half vertically).
  • Stainless steel bottom feed center pin and regular pin included.
  • Stainless steel hex grub screws.
  • Integrated spare grub screw storage on side post.
  • Extended protruding positive 510 pin will work on mechanical hybrid mods.
  • Dripper Plug included to close off the bottom feed 510 center pin for standard dripping.
  • 510 connection.

Product Includes:

  • One complete B2K RSA deck
  • Bottom feed pin with dripper plug

Recommended Builds:

B2K works great with single "exotic" coils such as fused clapton, alien, staggarton, etc. 0.15 to 0.5 ohm resistance coils at 30 to 70W of power. Feel free to experiment with many types of builds, including round wires. This RSA (Rebuildable Squonking Atomizer) has lots of room and caters to a wide variety of vaping styles.

Tip: Pack more wicking cotton to reduce chamber space for a warmer vape and even more flavour, especially when using higher resistance builds.

DESIGNED IN CANADA

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Wicks & Wires Vape Shoppe is not responsible for misuse of product, or dangerously low coil builds. Wicks & Wires Vape Shoppe is not liable for the use of improper batteries for your builds.