Sold Out $191.99
The Origen Genesis v2 MkII Batch 3, 4ml RTA by Norbert of Origen Mods is one of the most long lasting classic rebuildable tank atomizers in the vaping world, due to its impeccable machining quality, incredible flavour production, ease of use, size, and aesthetics!
Machined in small batches by Norbert in Hungary, the Origen Genesis (colloquially known as the "OriGenny"), is a Genesis-style atomizer with a single or dual coil build deck located on top of the liquid. Such a deck arrangement allows for dripper-like flavour performance due to the coils being much closer to the user's mouth. Additionally, the separation of the heating chamber above the liquid reservoir prevents spoiling (darkening) of liquid content.
Up to 4 ml of liquid is contained in the tank, and visible through the polycarbonate tank window. An optional stainless steel tank section (available as a separate purchase) can be used in place of the polycarbonate window if plastic tank cracking liquids are to be used.
Included hardware allows the user to arrange the deck for either single coil or dual coil usage. Use the appropriate chamber reducer when deciding to build for either dual or single coils.
A fill plug allows users to easily fill the tank.
Can be built with cotton wicks, mesh wicks, rope wicks, or any other number of wicking materials in a vertical orientation.
Multiple air flow control settings.
Capacity: Approximately 4ml
Air flow control settings: 1.2mm, 1.5mm, 2.0mm, or 2.5mm single OR dual coil options AND 2x1.2mm stacked for single coil use only.
Origen Genesis tank
1x Single coil deck (installed)
1x Dual coil deck
2x Fill hole screw/plug (1x installed)
4x Tank o-rings (2x installed)
4x Top cap o-rings (2x installed)
4x AFC o-rings (2x installed)
3x Negative contact screw (2x installed)
2x Positive grub screw for center post (1x installed)
1x Allen key
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.